How to Remove Moisture from Watch | Prevent Moisture Inside Out
As an Amazon Associate, I earn from qualifying purchases.
You’ve got a beautiful new watch, and you’re excited to wear it. However, there’s a problem. It seems to be covered with moisture. How to remove the moisture from the watch easily?
Well, you don’t have to sweat over it anymore. You can do that with the help of this watch-cleaning guide. All you need to do is heat up your watch. Next, use a microfiber cloth and open the darn watch. Clean all the nooks and crannies carefully. Hopefully, this will remove the moisture from your watch.
Hold on, there are a lot more options you can use. Plus, heating the watch too much can cause it to malfunction.
This is why I am here to show how you can easily remove moisture from a watch and prevent any malfunction.
What Causes Moisture in a Watch?
The two main causes of moisture inside a watch are the inner casing and the dial. Besides this, sweet and other body fluids can also lead to moisture drops in a watch.
Moisture can also build up inside because of high humidity or the condensation effect. The best way to clean a watch is to turn off the device and remove it for cleaning.
How to Remove Moisture from Watch | 5 Effective Steps
When exposed to moisture, it is important to remove the moisture from the watch as soon as possible. Else good luck preventing internal damage. Here is a step-by-step guide on how to remove moisture from your watch:
Step 01: Remove the watch
Remove the watch from your wrist and open the case. If you have a waterproof watch, make sure that the crown or button that controls water resistance is in the closed position.
Step 02: Use a microfiber cloth
Use a soft, lint-free cloth like a microfiber cloth to gently wipe the inside of the watch case, being careful not to touch the watch’s movement.
Step 03: Clean the battery
For a battery-operated watch, remove the battery and wipe the battery compartment clean. Moisture can accumulate on the battery, causing it to go bad.
Step 04: Dry for a few days
Place the watch in a dry, ventilated area and allow it to air out for 24-48 hours. However, place the watch in a moisture-free environment.
Step 05: Put it in uncooked rice (Additional Options)
If the watch is still damp, place it in a container of uncooked rice. The rice will absorb the moisture from the watch. Leave the watch in the rice for 24-48 hours.
Note: Once the watch is dry, reassemble the watch and wear it as usual.
How to Remove Moisture from Watch without Opening It?
When you go to clean your watch by opening it, you might lose the warranty. It’s better to leave it alone and use a no-opening method. Follow the steps below:
Method 01: Remove Moisture Using Alcohol
Have you ever wondered how to clean a watch with just alcohol? In case you have, then you’re at the right place! Here’s how you can do it.
- Next, you wet a cotton swab in alcohol.
- Try soaking it in alcohol. Trust us, it’s okay.
- Gently rub the cotton swab over the watch face and the band.
- Once you’re finished, let the watch air dry for a few hours before wearing it again.
Method 02: Remove Moisture Using Uncooked Rice
Using uncooked rice is another top way to get the moisture out without opening it. Though it doesn’t work all the way, a few moisture spots here and there will vanish for sure.
- Grab a small bowl and fill it with rice.
- Place your watch in the bowl and make sure that it’s completely covered by the rice.
- Leave your watch in the bowl for 24 hours.
- After 24 hours, take your watch out of the bowl and check to see if there’s any rice left on it.
- If there is, then the moisture has come out of the watch and you can try to put it back together. Otherwise, repeat steps 2-4.
How Can I Protect My Watch Glass from Moisture?
The glass face is one of the most vulnerable parts of a watch. It’s constantly exposed to the elements, and even a small amount of moisture can cause damage. So, how can you protect your watch glass from moisture?
You can get a watch protector that would save your expensive wristwatch from getting damaged. It comes with a silicone coating to protect the watch from scratches and scuffs.
Frequently Asked Questions (FAQs)
How do you get condensation out of a watch crystal?
If you want to get condensation out of a watch crystal, take it off the back and put it on the sink. This allows water and sweat to evaporate through the watch glass. In case the watch glass gets stuck, use a microfiber cloth to clean it up.
How do you get the moisture out of a Rolex watch?
To get the moisture out of a Rolex watch, the first step you should take is to remove the watch from your wrist and place it in a dry, safe location.
If possible, you should disassemble the watch so that all of its parts can be dried separately. Once the watch is dry, reassemble it and return it to your wrist. You can also try the rice burial method.
Will the condensation in my watch go away?
Not even close. Sometimes due to heat, it may go away, but it’s rare. You can try heating the watch and getting the water out. When it doesn’t work, go for other methods of cleaning moisture from your wristwatch.
Moisture can be a pain in the neck. I know that.
Hope now you know everything there is to removing moisture from the watch. All you need to do is open the watch and give it a cleaning inside out.
After washing and drying it, place the watch in direct sunlight for at least 8 hours to dry it completely. Once it is dry, it is recommended to apply an oil of choice to help prolong the life of your watch.
As an Amazon Associate, I earn from qualifying purchases.
- 10 Best Smartwatch Apps for Android Which You Shouldn’t Miss - March 27, 2023
- Does Samsung Watch Have Fall Detection? [Get Full Details in This] - March 22, 2023
- How to Turn Off Downtime on Apple Watch? [Learn Full Process] - March 20, 2023